SunTech 247: How to add temperature and SpO2 module upgrades

Transcript

This video tutorial demonstrates the SunTech 247's plug and play capabilities. Simply slide the temperature and SpO2 modules in place and the device transforms from a blood pressure monitor to a full vital signs device. The SunTech 247 is available through your local IMCO, NDC and Medline dealer reps. Call 1-800-421-8626 for more information or visit our website at www.SunTechMed.com. The SunTech 247 starts at $381 MSRP and is available in a variety of configurations.

• Adding to the Suntech 247 is simple and easy.
• To begin, slide the SpO2 module along the tracks on the bottom of the station.
• The module will click into the place and display a default reading.
• With the module in place, attach the sensor onto the side of the module and press the clip over the connector to hold it in place.
• With everything properly attached, push the power button to reboot the unit and module.
• To attach the temperature module, first click the blue temperature sensor into the back part of the module and set it aside.
• Slide the main temperature module along with the tracks on the top of the station.
• The module will click into place and display a default reading.
• Now take the back part of the module you set aside and slide it down the tracks until it clicks into place.
• Place the temperature probe into the well.
• Finally, make sure to reboot the unit by pressing the power button.